R2511-HP MSR Router Series Voice Configuration Guide(V5)

103
Step Command Remarks
5. Configure calling numbers
permitted to call out.
caller-permit calling-string
Optional.
By default, no calling number is
configured, and outgoing calls are
not restricted.
NOTE:
The
calling-string argument is in the format of { [ + ] string [ $ ] }| $. For specific meanings of these
symbols in the format, see
Voice Command Reference .
Configuring call authority control
To configure call authority control, you can assign subscribers to a subscriber group, then bind the group,
which has permit or deny authority configured, to a voice entity.
When a subscriber originates a call that matches the voice entity, the system compares the calling
number with each number in the bound subscriber group. If a match is found, the calling is permitted or
denied according to the authority (permit or deny) configured; otherwise, the system finds the next
matching voice entity until the call is permitted or denied.
Configuring match templates for a subscriber group
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program view.
dial-program N/A
4. Enter subscriber group view.
subscriber-group list-number
At most ten subscriber groups can
be configured for the system.
5. Configure a subscriber group
description string.
description text
Optional.
By default, no subscriber group
description string is configured.
6. Configure match templates for
the subscriber group.
match-template match-string
Optional.
By default, no match template is
configured for the subscriber
group.
Binding a subscriber group to a voice entity
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program view.
dial-program N/A
4. Create a voice entity and enter
voice entity view.
entity entity-number { pots | ivr |
vofr | voip }
N/A