R2511-HP MSR Router Series Voice Configuration Guide(V5)

108
Step Command Remarks
5. Configure the voice entity
priority.
priority priority-order
Optional.
0 by default.
6. Exit voice entity view.
quit N/A
7. Configure match order of
voice entity selection rules.
select-rule rule-order 1st-rule
[ 2nd-rule [ 3rd-rule ] ]
Optional.
By default, the match order of rules
for the voice entity selection is
exact match->voice entity
priority->random selection.
Configuration example of voice entity selection priority rules
Figure 29 and the following describe the voice entity selection priority rule configuration on Router A and
Router B.
Figure 29 Network diagram
1. Configure Router A:
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
# Configure POTS entity 1000.
[RouterA-voice-dial] entity 1000 pots
[RouterA-voice-dial-entity1000] match-template 10001234$
[RouterA-voice-dial-entity1000] line 1/0
[RouterA-voice-dial-entity1000] quit
# Configure VoIP entity 2000, VoIP entity 2001, and VoIP entity 2002.
[RouterA-voice-dial] entity 2000 voip
[RouterA-voice-dial-entity2000] match-template 20001234$
[RouterA-voice-dial-entity2000] address sip ip 1.1.1.2
[RouterA-voice-dial-entity2000] priority 10
[RouterA-voice-dial-entity2000] quit
[RouterA-voice-dial] entity2001 voip
[RouterA-voice-dial-entity2001] match-template 2000123.$
[RouterA-voice-dial-entity2001] address sip ip 1.1.1.2
[RouterA-voice-dial-entity2000] priority 5
[RouterA-voice-dial-entity2001] quit
[RouterA-voice-dial] entity2002 voip
[RouterA-voice-dial-entity2002] match-template 2000....$
[RouterA-voice-dial-entity2002] address sip ip 1.1.1.2
[RouterA-voice-dial-entity2002] quit
2. Configure Router B:
<RouterB> system-view