R2511-HP MSR Router Series Voice Configuration Guide(V5)

111
# Configure POTS entity 2000.
[RouterB-voice-dial] entity 2000 pots
[RouterB-voice-dial-entity2000] match-template 20001234$
[RouterB-voice-dial-entity2000] line 1/0
3. Configure different voice entity type selection priority rules:
{ Configure the system to select voice entities in order of VoIP->POTS->VoFR->IVR.
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] select-rule type-first 2 1 3 4
After Telephone A dials 20001234, the number will match VoIP entity 2000.
{ Configure the system to select voice entities in order of POTS->VoIP->VoFR->IVR.
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] select-rule type-first 1 2 3 4
After Telephone A dials 20001234, the number will match POTS entity 1001.
Configuring the voice entity search function
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program
view.
dial-program N/A
4. Configure the maximum
number of voice entities found
before a search process stops.
select-rule search-stop
max-number
Optional.
By default, the maximum number of
voice entities found before a
search process stops is 128.
5. Enter voice entity view.
entity entity-number { pots | ivr |
vofr | voip }
N/A
6. Disable the voice entity search
function.
select-stop
Optional.
By default, the voice entity search
function is enabled.
Configuration example of the voice entity search function
Figure 31 and the following describe the configurations for the voice entity search function on Router A
and Router B.
Figure 31 Network diagram