R2511-HP MSR Router Series Voice Configuration Guide(V5)

117
Ste
p
Command Remarks
6. Configure a number
substitution rule.
rule rule-tag input-number
output-number [ number-type
input-number-type
output-number-type |
numbering-plan
input-numbering-plan
output-numbering-plan ] *
Optional.
By default, no number substitution
rule is configured.
7. Configure the preferred
number substitution rule.
first-rule rule-number
Optional.
By default, the preferred number
substitution rule is not configured.
8. Exit voice number-substitute
view and enter voice dial
program view.
quit N/A
9. Enter voice entity view.
entity entity-number { pots | vofr |
voip }
N/A
10. Bind a number substitution
rule list to a voice entity.
substitute { called | calling }
list-number
Optional.
By default, no number substitution
rule list is bound to a voice entity.
To configure number substitution for a voice subscriber line:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program
view.
dial-program N/A
4. Create a number substitution
rule list and enter voice
number-substitute view.
number-substitute list-number N/A
5. Configure a dot-match rule.
dot-match { end-only | left-right |
right-left }
Optional.
By default, the dot match rule is
end-only.
6. Configure a number
substitution rule.
rule rule-tag input-number
output-number [ number-type
input-number-type
output-number-type |
numbering-plan
input-numbering-plan
output-numbering-plan ] *
Optional.
By default, no number substitution
rule is configured.
7. Configure the preferred
number substitution rule.
first-rule rule-number
Optional.
By default, the preferred number
substitution rule is not configured.
8. Exit voice number-substitute
view and enter voice dial
program view.
quit N/A