R2511-HP MSR Router Series Voice Configuration Guide(V5)

119
Configuring a dial prefix
The following section provides information about configuring a dial prefix.
Configuration prerequisites
The required basic functions have completed on POTS and VoIP entities.
Configuration procedure
You can configure a prefix for dialed PSTN numbers. When a POTS entity originates a call, the dial prefix
will be added to the called number.
To configure a dial prefix:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program view.
dial-program N/A
4. Enter POTS entity view.
entity entity-number pots N/A
5. Configure a dial prefix.
dial-prefix string No dial prefix by default.
6. Bind a number template to the
local voice entity.
match-template match-string
By default, no number template is
bound to the local or trunk voice
subscriber line.
Displaying and maintaining dial plan configuration
Task Command Remarks
Display information of the
configured number substitution rule
lists.
display voice number-substitute
[ list-tag ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information of the
configured subscriber groups.
display voice subscriber-group
{ subscriber-group-list-tag | all } [ |
{ begin | exclude | include }
regular-expression ]
Dial plan configuration examples
This section provides dial plan configuration examples.