R2511-HP MSR Router Series Voice Configuration Guide(V5)

141
Configuring registrar information for a SIP UA
Configuration guidelines
The transport layer protocol specified in the registrar command must have been specified with the listen
transport command. Otherwise, no register request can be initiated.
If TLS is specified in the registrar command, you also need to configure the secure sockets layer (SSL)
policy name of the client with the crypto command. Otherwise, no register request can be initiated.
You can use the registrar command only when the SIP registration function is disabled.
Configuration procedure
To configure registrar information for a SIP UA:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP client view.
sip N/A
4. Configure the registrar
information for the SIP
UA.
registrar { dns domain-name | ipv4
ip-address } [ port port-number ]
[ expires seconds ] [ tcp | tls ] [ scheme
{ sip | sips } ] [ slave ]
By default, no registrar information
is configured for a SIP UA.
If the domain name of the registrar
is specified, DNS lookup will be
performed as configured. For more
information, see "Configuration
procedure (3: d
estination
domain)."
Configuring proxy server information for a SIP UA
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP client view.
sip N/A
4. Configure the proxy server
information for the SIP UA.
proxy { dns domain-name | ipv4
ip-address } [ port port-number ]
By default, no proxy server
information is configured for a SIP
UA.
If the domain name of the proxy
server is specified, DNS lookup will
be performed as configured. For
more information, see
"Configuration procedure (3:
desti
nation domain)."
Configuring registration timers
A voice entity or an SIP trunk account expires after it has registered with the registrar for a specified
period of time, which is the registration expiration interval.