R2511-HP MSR Router Series Voice Configuration Guide(V5)

146
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP client view.
Sip N/A
4. Set the DNS lookup mode.
dns-type { a-record | srv }
Optional.
The default DNS lookup method is
a-record.
If you configure the destination
port by using the address sip { dns
domain-name [ port port-number ]
| enum-group group-number },
proxy dns domain-name [ port
port-number ], or mwi-server dns
domain-name [ port port-number ]
command, the DNS lookup mode
can only be Type-A.
5. Exit the SIP view.
quit N/A
6. Enter voice dial program view.
dial-program N/A
7. Enter VoIP entity view.
entity entity-number voip N/A
8. Configure the domain name.
address sip dns domain-name
[ port port-number ]
Not configured by default.
For more information about DNS, see Layer 3—IP Services Configuration Guide.
Configuration procedure (4: ENUM)
With the ENUM feature, the device translates the destination number into the corresponding URL
according to the matching ENUM translation rule, and uses this URL to perform DNS lookup.
To configure SIP routing (4: ENUM):
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program view.
dial-program N/A
4. Enter ENUM rule group view.
enum-group group-number N/A
5. Configure an ENUM
translation rule.
rule tag preference value
match-pattern replacement-rule
domain-name
Not configured by default.
6. Exit SIP view.
quit N/A
7. Enter VoIP entity view.
entity entity-number voip N/A
8. Configure ENUM-based SIP
routing by referencing the
ENUM rule group.
address sip enum-group
group-number
Not configured by default.