R2511-HP MSR Router Series Voice Configuration Guide(V5)

147
Configuring user information
When accessing the service provider network, configure the user information provided by the service
provider to confirm user identity.
To configure user information:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program
view.
dial-program N/A
4. Enter POTS voice entity view.
entity entity-number pots N/A
5. Configure user information.
uri user-info [ domain
domain-name ]
Optional.
By default,
number@SIP-device-domain-nam
e or number
@SIP-interface-IP-address is used
to send request messages.
Configuring outbound SIP proxy server information
for a SIP UA
An outbound SIP proxy server resides between an internal network and a public network. An internal SIP
UA sends all request messages to the outbound proxy server to communicate with the registrar and proxy
server on the public network. The outbound proxy server routes the SIP request messages to the public
network according to their Request-Line header fields.
To configure the outbound proxy server information for a SIP UA:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP client view.
sip N/A
4. Configure the outbound proxy
server information for the SIP
UA.
outbound-proxy { dns
domain-name | ipv4 ip-address }
[ port port-number ]
By default, no outbound proxy
server information is configured for
the SIP UA.
Configuring transport layer protocol for SIP calls
This section describes how to configure UDP and TCP as the transport layer protocol for SIP outgoing and
incoming calls.