R2511-HP MSR Router Series Voice Configuration Guide(V5)

150
Ste
p
Command Remarks
4. Reference the SSL policy for
the client.
crypto ssl-client-policy
client-policy-name
Not configured by default.
5. Reference the SSL policy for
the server.
crypto ssl-server-policy
server-policy-name
Not configured by default.
For more information about SSL
policies, see Security
Configuration Guide.
To specify TLS as the global transport layer protocol for outgoing SIP calls:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP client view.
sip N/A
4. Specify TLS as the global
transport layer protocol for
outgoing SIP calls.
transport tls By default, UDP is adopted.
To specify TLS as the transport layer protocol for outgoing SIP calls on a VoIP voice entity:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program
view.
dial-program N/A
4. Enter VoIP voice entity view.
entity entity-number voip N/A
5. Specify TLS as the transport
layer protocol for outgoing SIP
calls.
transport tls
By default, the global transport
layer protocol is UDP, and no
transport layer protocol is specified
for a VoIP voice entity.
If the transport layer protocol is not
specified for a VoIP voice entity,
the global setting is applied.
This command is effective only
when the type of the VoIP voice
entity is SIP.
If you execute this command, the
default port number for the VoIP
voice entity is 5061. For more
information, see the address sip
command in Voice Command
Reference.
NOTE:
The transport layer protocol configured on two communication parties must be the same. That is, if you
execute the transport tls command on the sender device, you need to execute the listen transport tls
command on the receiver device.