R2511-HP MSR Router Series Voice Configuration Guide(V5)

181
Ste
p
Command Remarks
7. Enable the local SIP
server.
server enable
By default, the local SIP server is disabled.
The functions of the local SIP server can
take effect after you execute this
command.
Configuring user information
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP server view.
sip-server N/A
4. Create a user to be registered
with and enter register user
view.
register-user tag
By default, no user is created to be
registered.
5. Configure a DN for the user.
number party-number
By default, no DN is configured for
the user.
6. Configure authentication
information for the user.
authentication username username
password { cipher | simple }
password
Optional.
By default, no authentication
information is configured for the
user.
When accepting registrations and
calls from the user, the local SIP
server needs to check the user’s
authentication information for
validity. The user can register with
the local SIP server to originate
calls only after passing
authentication.
7. Configure the maximum
registration interval.
expires time-interval
Optional.
By default, the maximum
registration interval is configured
with the server-bind ipv4
command.
Specifying a trusted node
A trusted node can directly originate calls without being authenticated by the local SIP server. You do not
need to configure user information for the number of the trusted node on the local SIP server.
To specify a trusted node:
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP server view.
sip-server N/A