R2511-HP MSR Router Series Voice Configuration Guide(V5)

184
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP server view.
sip-server N/A
4. Enter call route view.
call-route N/A
5. Configure a call route.
trunk tag called-number called-pattern ipv4
dest-ip-addr [ port port-number ] [ area-prefix
prefix ]
By default, no call route is
configured.
Displaying and maintaining the SIP local survival
feature configuration
Task Command Remarks
Display information of a registered
user or all registered users.
display voice sip-server
register-user { tag | all } [ | { begin
| exclude | include }
regular-expression ]
Available in any view.
Display the server resource
information.
display voice sip-server
resource-statistic [ | { begin |
exclude | include }
regular-expression ]
SIP local survival feature configuration examples
This section provides configuration examples for SIP local survival.
Configuring the local SIP server to operate in the alone mode
Network requirements
Configure the local SIP server on Router C to operate in alone mode so that the phones register with, and
can make and receive calls through, the local SIP server. See Figure 52.
Figure 52 Network diagram
Configuration procedure
1. Configure Router C:
# Configure the router to operate in the alone mode.
<RouterC> system-view
[RouterC] voice-setup
[RouterC-voice] sip-server