R2511-HP MSR Router Series Voice Configuration Guide(V5)

205
Ste
p
Command Remarks
4. Enter VoIP voice entity
view.
entity entity-number voip N/A
5. Bind a SIP trunk account
to the VoIP voice entity.
bind sip-trunk account account-index
By default, no SIP trunk account
is bound to the VoIP voice
entity.
Only an existing SIP trunk
account can be bound to a
VoIP voice entity.
6. Bind a SIP server group
to the VoIP voice entity.
address sip server-group group-number
By default, no SIP server group
is bound to the VoIP voice
entity.
A VoIP voice entity can have
only one existing SIP server
group bound to it.
Specifying the destination address
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program
view.
dial-program N/A
4. Enter VoIP voice entity
view.
entity entity-number voip N/A
5. Bind a SIP trunk account
to the VoIP voice entity.
bind sip-trunk account account-index
By default, no SIP trunk account
is bound to the VoIP voice
entity.
Only an existing SIP trunk
account can be bound to a
VoIP voice entity.
6. Specifying the
destination address.
address sip { dns domain-name [ port
port-number ] | ip ip-address [ port
port-number ] }
By default, no destination
address is specified for the
VoIP voice entity.
Specifying the proxy server used for outbound calls
When a SIP proxy server is used to route SIP messages and audio traffic, the SIP trunk device uses the SIP
server group specified by the proxy command to make calls.
If no registrar is specified by the registrar or registrar server-group command in SIP client view, the proxy
server or SIP server group specified by the proxy command can be used as the registrar.
To specify the proxy server used for outbound calls:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A