R2511-HP MSR Router Series Voice Configuration Guide(V5)

207
Ste
p
Command Remarks
3. Enter voice dial program
view.
dial-program N/A
4. Enter VoIP voice entity
view.
entity entity-number voip N/A
5. Match a source host
name prefix for the VoIP
voice entity.
match source host-prefix host-prefix
Optional.
Not specified by default. In
other words, all source host
names can be matched.
6. Match a destination host
name prefix for the VoIP
voice entity.
match destination host-prefix host-prefix
Optional.
Not specified by default. In
other words, all destination
host names can be matched.
7. Match a source address
for the VoIP voice entity.
match source address { ipv4 ip-address |
dns dns-name | server-group group-index }
Optional.
Not specified by default. In
other words, all source
addresses can be matched.
Configuring call routes for inbound calls
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program view.
dial-program N/A
4. Enter VoIP voice entity view.
entity entity-number voip N/A
5. Configure the called number
template for the VoIP voice entity.
match-template match-string Not configured by default.
6. Configure the call route.
address sip { dns domain-name [ port
port-number ] | ip ip-address [ port
port-number ] | proxy }
Not configured by default.
Enabling codec transparent transfer
If the SIP trunk device does not support the codec capability sets supported by the calling and called
parties, enable codec transparent transfer on the SIP trunk device. The SIP trunk device transparently
transfers codec capability sets between two parties. The calling and called parties complete the codec
negotiation.
To enable codec transparent transfer:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program view.
dial-program N/A