R2511-HP MSR Router Series Voice Configuration Guide(V5)

9
Task Remarks
Configuring voice call performance-related parameters Optional.
Configuring global default parameters for voice entities Optional.
Enabling the trap function Optional.
Configuring a POTS voice entity
This section covers the procedures for creating and configuring a POTS voice entity.
POTS voice entity configuration task list
Task Remarks
Creating a POTS voice entity Required.
Configuring basic functions Required.
Configuring the local POTS voice entity to play ringback tones Optional.
Configuring DTMF transmission Optional.
Enabling VAD Optional.
Configuring options related to dial plan Optional.
Configuring the jitter buffer Optional.
Configuration prerequisites
Log in to the router equipped with a voice card (for example, an FXS interface card), and enter user view.
Creating a POTS voice entity
Ste
p
Command Remarks
9. Enter system view.
system-view N/A
10. Enter voice view.
voice-setup N/A
11. Enter voice dial program view.
dial-program N/A
12. Create a POTS voice entity and
enter POTS voice entity view.
entity entity-number pots N/A
13. Bind a number template: bind a
number template to a local
subscriber line, or if the POTS voice
entity serves as a trunk, configure a
number template for the terminating
side.
match-template match-string
By default, no number template
is bound to the local voice
subscriber line. If the POTS
voice entity serves as a trunk, no
number template is configured
for the terminating side.