R2511-HP MSR Router Series Voice Configuration Guide(V5)

223
Configuring basic H.323 gateway functions
Configuration prerequisites
Complete the required configuration of POTS and VoIP voice entities.
Configuration guidelines
The gatekeeper identifies the type of a gateway by its area ID. The gatekeeper and gateways reach
an agreement on related gateway types in advance. For example, Area ID 1# represents a voice
gateway, and Area ID 2# represents a video gateway. Before a VoIP entity communicates with the
gatekeeper, the gatekeeper judges the gateway type by the received area ID. At most 30 area IDs
can be configured in GK-Client view.
Before you can configure a secondary gatekeeper, configure a primary gatekeeper with the gk-id
command.
Use the ras-on command to register with the gatekeeper only after you complete all required basic
voice gateway configurations.
Configuration procedure
To configure basic H.323 gateway functions:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Configure an H.323
descriptor.
voip h323-descriptor descriptor
Optional.
The default is Wqldg0Hcwfydz.
If you want to change the
descriptor, make sure you
understand the impact of this
command before you use it.
4. Enter gateway view.
gk-client N/A
5. Assign an area ID to the
H.323 gateway.
area-id string
Optional.
No area ID is assigned by default.
6. Bind a source IP address
(typically the IP address of a
loopback interface) with the
H.323 gateway.
gw-address ip-address
No source IP address is bound by
default.
7. Configure a gateway alias.
gw-id namestring
No gateway alias is configured by
default. Each gateway can be
assigned only one alias.
8. Configure a primary
gatekeeper.
gk-id gk-name gk-addr
gk-ipaddress [ ras-port ]
No primary gatekeeper is
configured by default.
9. Configure a secondary
gatekeeper.
gk-2nd-id gk-name gk-addr
gk-ipaddress [ ras-port ]
Optional.
No secondary gatekeeper is
configured by default.
10. Enable the gatekeeper client
function to register with the
gatekeeper.
ras-on Disabled by default.