R2511-HP MSR Router Series Voice Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router

231

232

233

234

235

236

237

238

239

240

224

For more information about POTS and VoIP entities, see "Configuring voice entities."

Configuring registration password

You can configure the gateway to send a password with the RPQ message sent for registration with the

gatekeeper. When the gatekeeper receives this request, it compares the password with the one

configured on it for the gateway. The gatekeeper will accept the request and return an RCF only when

they are the same.

After the GK Client (router) is configured with the registration password, the password is carried during

the whole registration process.

Configuration prerequisites

Complete the required basic H.323 gateway configurations except for the ras-on command. (This

command is used for initiating registration requests to the gatekeeper after all configurations are

completed.)

Configuration procedure

To configure a registration password:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter voice view.

voice-setup N/A

3. Enter gateway view.

gk-client N/A

4. Configure a gateway

registration password.

gk-security register-pwd { cipher |

simple } password

No registration password is

configured by default.

Enabling security calling

To let the gateway pass call tokens from the gatekeeper, configure security calling.

After a call is originated, the originating gateway obtains a call token from the originating gatekeeper

and transparently transmits it to the terminating gateway which will then pass the token to the terminating

gatekeeper. Tokens can be synchronized among gatekeepers. The terminating gatekeeper can return the

call accept message to the terminating gateway only after it accepts the token.