R2511-HP MSR Router Series Voice Configuration Guide(V5)

236
Configuring call forwarding priority level
A priority level applies to only the features of call waiting, call forwarding, and hunt group.
By default, the priority levels for hunt group, call forwarding, and call waiting are 1, 2, and 3 respectively.
The smaller the value is, the higher the priority level is. When you change the priority level of a feature,
make sure that different features have different priority levels.
To configure a call forwarding priority level:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice subscriber line
view.
subscriber-line line-number N/A
3. Configure a call forwarding
priority level.
call-forwarding priority level
Optional.
The default is 2.
Configuration example
Call forwarding busy
Place a call from Telephone A to Telephone B. The system forwards the call to Telephone C when
Telephone B is busy. Finally, Telephone A and Telephone C start a conversation.
# Enable call forwarding busy for the voice subscriber line of Telephone B and forward the call from
Telephone A to Telephone C (3000).
<Sysname> system-view
[Sysname] subscriber-line 2/0
[Sysname-subscriber-line2/0] call-forwarding on-busy enable forward-number 3000
Call forwarding unconditional
Place a call from Telephone A to Telephone B. The system forwards the call to Telephone C
unconditionally. Finally, Telephone A and Telephone C start a conversation.
# Enable call forwarding unconditional for the voice subscriber line of Telephone B and forward the call
from Telephone A to Telephone C (3000).
<Sysname> system-view
[Sysname] subscriber-line 2/0
[Sysname-subscriber-line2/0] call-forwarding unconditional enable forward-number 3000
Call forwarding no reply
Place a call from Telephone A to Telephone B. The system forwards the call to Telephone C when
Telephone B fails to answer the call. Finally, Telephone A and Telephone C start a conversation.
# Enable call forwarding no reply for the voice subscriber line of Telephone B and forward the call from
Telephone A to Telephone C (3000).
<Sysname> system-view
[Sysname] subscriber-line 2/0
[Sysname-subscriber-line2/0] call-forwarding no-reply enable forward-number 3000