R2511-HP MSR Router Series Voice Configuration Guide(V5)

248
Feature name Enable ke
y
s Disable ke
y
s Remarks
Block CallId for
Current Call
*890*destination
number#
None
A subscriber can dial the feature code to
hide the calling number for the current
call and the called subscriber cannot see
the calling number.
Applied only once.
Subscriber Speed
Dial (range)
*601*code# None
After a speed dial number is configured
for a subscriber on the VCX, the
subscriber can dial the feature code to
originate a call to the corresponding
telephone.
Applied only once.
Malicious Call Trace *119# None
After a subscriber dials the feature code,
the VCX sends X-ISDN tunnel messages to
the peer gateway for processing.
Applied only once.
Block Barge In *429# *429#
During a conversation, if the local dials
the feature code, no voice data will be
sent so that the supervisor cannot monitor
or barge in the conversation.
Camp On
*469*destination_n
umber#
None
When the destination telephone is in a
conversation, the local end can dial the
feature code to ask the peer end
(destination telephone) to call back. After
the peer end hangs up, the local end is
alerted. The local end picks up the phone
and the peer end is alerted. After the peer
end picks up the phone, it can
communicate with the local end.
Applied only once.
Serial Calling
*471*destination_n
umber#
None
In a conversation, the local end dials the
feature code to transfer the call from the
peer end to the destination telephone.
After the destination telephone is on
hook, the local end is alerted and can
pick up the phone to resume the
conversation with the peer end. The
above process can be repeated to
perform serial call transfer.
Applied only once.