R2511-HP MSR Router Series Voice Configuration Guide(V5)

256
MWI
Network requirements
As shown in Figure 75, Telephone A and Telephone B registered with the VCX through Router A and
Router B respectively. Configure a voice mailbox for Telephone A on the voice server, configure the
address and operation mode of the MWI server on Router A, and enable MWI on the voice subscriber
line of Telephone A.
Figure 75 Network diagram
Configuration procedure
1. Configure VCX:
2. Configure call processing server
Open the Web interface of the server and select Central Management Console. Configure the
telephone information of Telephone A and Telephone B, with the subscriber passwords as
1000 and 2000 respectively. Figure 76 u
ses Telephone A as an example.
Figure 76 Configuration page of call processing server (1)
When you enter the Edit Phone Profile page, as shown in Figure 77, type 9000 in the Voice
Mail Number field.