R2511-HP MSR Router Series Voice Configuration Guide(V5)

15
Task Remarks
Configuring out-of-band DTMF transmission in fast connection mode Optional.
Configuring out-of-band DTMF transmission with tunneling enabled Optional.
Enabling VAD Optional.
Configuring options related to dial plan Optional.
Configuring the jitter buffer Optional.
Setting the keepalive interval Optional.
Creating a VoIP voice entity
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program
view.
dial-program N/A
4. Create VoIP voice entity and
enter its view.
entity entity-number voip N/A
5. Configure a number template
on the terminating router.
match-template match-string
By default, no called number
template is configured for the voice
entity.
6. Configure a policy for routing
from the VoIP voice entity to
the terminating VoIP gateway.
• address sip { dns domain-name
[ port port-number ] |
enum-group group-number | ip
ip-address [ port port-number ]
| proxy | server-group
group-number }
• address { ip ip-address | ras }
Use either command.
By default, no policy is configured.
7. Configure an area ID.
area-id string
Optional.
By default, no area ID is
configured.
If the routing policy is SIP, this
command is unavailable.
8. Configure the DSCP subfield
of the ToS field in IP packets of
the RTP stream carried by the
VoIP voice entity.
dscp media dscp-value
Optional.
The default is EF (101110).
Configuring basic functions
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program view.
dial-program N/A