R2511-HP MSR Router Series Voice Configuration Guide(V5)

281
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Configure the faculty set of the
voice gateway in H.323 slow
connection to contain T.38
faculty description..
voip h323-conf tcs-t38
By default, the faculty set contains
T.38 faculty description.
NOTE:
Because NetMeeting does not support T.38 faculty description parsing, you must disable the voice
gateway in H.323 slow connection mode from containing the T.38 faculty description in its faculty set to
interwork with NetMeeting.
Configuring global default parameters for fax
Configuration prerequisites
VoIP configuration is completed, IP calls can be made successfully, and fax machines are connected
correctly.
Configuration procedure
To configure global default parameters for fax:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program
view.
dial-program N/A
4. Configure the transmit energy
level of the gateway carrier
globally.
default entity fax level level
Optional.
By default, the transmit energy
level of the gateway carrier is
–
15
dBm.