R2511-HP MSR Router Series Voice Configuration Guide(V5)

290
Step Command Remarks
13. Set the
maximum-call-connection
number to the IVR voice
entity.
max-call set-number
Optional.
By default, no
maximum-call-connection set is
bound to an IVR voice entity (that is,
the IVR voice entity does not belong
to any maximum-call-connection set
and there is no limitation on the
number of call connections).
14. Configure the priority for
the IVR voice entity.
priority priority-order
Optional.
The default is 0.
The smaller the priority value, the
higher the priority.
15. Disable the voice entity
search function.
select-stop
Optional.
Enabled by default.
16. Configure SIP
authentication information.
user username password { cipher |
simple } password [ cnonce cnonce |
realm realm ] *
Optional.
By default, no SIP authentication
information is configured in IVR
voice entity view.
17. Change the management
state of the IVR voice entity
from up to down.
shutdown
Optional.
Up by default.
Specifying the ID for a media resource
A media resource can be a media resource file or a music on hold (MOH) audio input port. Enter the
corresponding media resource management view by specifying a codec. In each media resource
management view, you can specify a media resource ID for a media resource file or an MOH audio
input port.
To specify a media resource ID for a media resource:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter IVR management view.
ivr-system N/A
4. Enter media resource
management view.
media-file { g711alaw |
g711ulaw | g723r53 | g729r8 }
N/A
5. Specify an ID for a media
resource (a media resource file
or an MOH audio input port).
set-media media-id { file filename
| moh-interface
interface-number }
By default, no ID is specified for a
media resource.