R2511-HP MSR Router Series Voice Configuration Guide(V5)

293
Ste
p
Command Remarks
7. Specify the audio file that will
be played to the subscriber
when the node is waiting for
the subscriber to press keys.
media-play media-id [ play-times ]
[ force ]
Optional.
Not configured by default.
8. Configure the input error
processing method for the
node.
input-error { end-call |
goto-pre-node | goto-node
node-id } [ media-play media-id
[ play-times ] | repeat
repeat-times ] *
Optional.
Not configured by default.
9. Configure the input timeout
processing method for the
node.
timeout { end-call | goto-pre-node
| goto-node node-id } [ expires
seconds | media-play media-id
[ play-times ] | repeat
repeat-times ] *
Optional.
Not configured by default.
NOTE:
If you do not confi
g
ure error processin
g
and timeout processin
g
methods for a node, the system applies
global processing methods. If you confi
g
ure the processin
g
methods both for the node and
g
lobally, the
configurations made for the node takes precedence.
Configuring a Jump node
You can configure the following functions for a Jump node: playing audio files, jumping to another node,
and terminating a call. To handle input errors and input timeouts, you need to configure error processing
and timeout processing methods for a Jump node. If you do not configure the methods, the system applies
global processing methods.
To configure a Jump node:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter IVR management view.
ivr-system N/A
4. Enter Jump node view.
node node-id jump N/A
5. Configure the node to execute
the jump operation based on
the input of the subscriber.
user-input character { end-call |
goto-node node-id |
goto-pre-node }
Not configured by default.
6. Specify the audio file that will
be played to the subscriber
when the node is waiting for
the subscriber to press keys.
media-play media-id [ play-times ]
[ force ]
Optional.
Not configured by default.
7. Configure the input error
processing method for the
node.
input-error { end-call |
goto-pre-node | goto-node
node-id } [ media-play media-id
[ play-times ] | repeat
repeat-times ] *
Optional.
Not configured by default.