R2511-HP MSR Router Series Voice Configuration Guide(V5)
294
Ste
p
Command
Remarks
8. Configure the input timeout
processing method for the
node.
timeout { end-call | goto-pre-node
| goto-node node-id } [ expires
seconds | media-play media-id
[ play-times ] | repeat
repeat-times ] *
Optional.
Not configured by default.
NOTE:
You can configure input timeout processin
g
and input timeout processin
g
methods as needed. If you do
not configure those methods for a node, the system applies global processing methods. If you confi
g
ure
the processing methods both for the node and globally, the configurations made for the node takes
precedence.
Configuring a Service node
You can configure the following functions for a Service node: playing audio files, jumping to another
node, executing immediate secondary call, and terminating a call.
You can configure at most three functions for a Service node and use the select-rule operation-order
command to specify the execution order of the functions. For example, if you specify the order by using
the select-rule operation-order 2 1 3 command, the execution order of the functions is 2->1->3. If you do
not specify the execution order, the default execution order will be applied, that is: 1->2->3.
If an executed function is to jump to another node or to terminate a call, the rest one or two functions are
not executed. For more information, see "Service node configuration example 2."
Because a Service node has no need to wait for subscriber input, you do not need to configure the error
processing and timeout processing methods for a Service node.
To configure a Service node:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter IVR management view.
ivr-system N/A
4. Enter Service node view.
node node-id service N/A
5. Specify the execution order of
the configured functions.
select-rule operation-order
1st-operation 2nd-operation
3rd-operation
Optional.
The default execution order is
1->2->3.
6. Configure functions for the
Service node.
operation number { call-immediate
call-number | end-call |
goto-node node-id |
goto-pre-node | media-play
media-id [ play-times ] }
Optional.
Not configured by default.