R2511-HP MSR Router Series Voice Configuration Guide(V5)

302
# Configure IVR voice entity 300 and specify node 10 as the root node.
[RouterB-voice-dial] entity 300 ivr
[RouterB-voice-dial-entity300] match-template 300
[RouterB-voice-dial-entity300] ivr-root 10
[RouterB-voice-dial-entity300] quit
[RouterB-voice-dial] quit
# Specify media resource IDs for media resource files:
{ Specify 10001 for the file cfa0:/wav/g729r8/welcome.wav
{ Specify 10002 for the file cfa0:/wav/g729r8/timeout.wav
{ Specify 10003 for the file cfa0:/wav/g729r8/input_error.wav
[RouterB-voice] ivr-system
[RouterB-voice-ivr] media-file g729r8
[RouterB-voice-ivr-g729r8] set-media 10001 file cfa0:/wav/g729r8/welcome.wav
[RouterB-voice-ivr-g729r8] set-media 10002 file cfa0:/wav/g729r8/timeout.wav
[RouterB-voice-ivr-g729r8] set-media 10003 file cfa0:/wav/g729r8/input_error.wav
[RouterB-voice-ivr-g729r8] quit
# Configure global error processing and timeout processing methods:
{ If the timeout value expires before the subscriber dials at Telephone A, Router B plays the audio file
timeout.wav. If the timeout value expires for four times, Router B terminates the call.
{ If the subscriber dials a wrong number at Telephone A, Router B plays the audio file input_error.wav for
Telephone A. If the subscriber dials wrong numbers for three times, Router B terminates the call.
[RouterB-voice-ivr] ivr-timeout repeat 4 expires 5 media-play 10002
[RouterB-voice-ivr] ivr-input-error repeat 3 media-play 10003
# Configure Jump node 10:
{ After the IVR access number 300 is matched, the audio file welcome.wav is played.
{ After the subscriber presses the key # at Telephone A, the call is terminated.
[RouterB-voice-ivr] node 10 jump
[RouterB-voice-ivr-node10] media-play 10001
[RouterB-voice-ivr-node10] user-input # end-call
3. Verify configurations:
After dialing the number 300, the subscriber hears the voice prompts of the audio file
welcome.wav. After that, if the subscriber presses the key #, the call will be terminated.
Service node configuration example 1
Network requirements
As shown in Figure 96, configure the IVR access number and customize Service node functions on Router
B.
• The subscriber originates a call through a SIP server by dialing 300 (the IVR access number of
Router B) from Telephone A, Router B executes immediate secondary call to Telephone B, and
Telephone B rings.
• If the subscriber dials a wrong number at Telephone A, Router B plays the audio file
input_error.wav.