R2511-HP MSR Router Series Voice Configuration Guide(V5)

339
• In the caller number process with IVR, a user can select a language in which prompt tones are
played. After the user selects a language, the voice gateway plays tones in the selected language
to prompt for a called number.
Configuration prerequisites
You have configured an access number.
Configuration procedure
To configure a two-stage dialing process:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Enter access number view.
gw-access-number access-number
N/A
5. Configure a two-stage dialing
process.
process-config { callernumber |
cardnumber | voice-caller }
Caller number process with IVR by
default.
Enabling accounting function for two-stage dialing users
After configuring access numbers, you can enable the RADIUS accounting function for two-stage dialing
users. Before enabling the accounting function, make sure that the RADIUS server and the RADIUS client
(voice gateway) can communicate with each other at the network layer and that a list of corresponding
two-stage dialing users as well as accounting policies has been configured on the RADIUS server.
Calls will be released in case of an accounting failure.
Configuration prerequisites
You have configured an access number.
Configuration procedure
To enable the accounting function for two-stage dialing users:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Enter access number view.
gw-access-number access-number
N/A
5. Enable the accounting
function for two-stage dialing
users.
accounting Disabled by default.
Enabling the authentication function for two-stage dialing users
After configuring access numbers, you can enable the RADIUS authentication function for two-stage
dialing users. Before enabling the authentication function, make sure the RADIUS server and the RADIUS