R2511-HP MSR Router Series Voice Configuration Guide(V5)

340
client can communicate with each other at the network layer, and that a list of corresponding two-stage
dialing users as well as authentication policies has been configured on the RADIUS server.
The authentication function for two-stage dialing users is enabled for a specific access number, while the
authentication function for one-stage dialing users is enabled in voice AAA client view.
Configuration prerequisites
You have configured an access number.
Configuration procedure
To enable the authentication function for two-stage dialing users:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Enter access number view.
gw-access-number
access-number
N/A
5. Enable the authentication function for
two-stage dialing users.
authentication Disabled by default.
Enabling the authorization function for two-stage dialing users
Before enabling the authorization function, make sure:
• The RADIUS server and the RADIUS client can communicate with each other at the network layer.
• Access numbers have been configured and the authentication function has been enabled on the
RADIUS server.
• A list of user authorities as well as authorization policies has been configured on the RADIUS server.
Configuration prerequisites
You have configured an access number.
Before enabling the authorization function, make sure the RADIUS server and the RADIUS client can
communicate with each other at the network layer, and that a list of corresponding two-stage dialing
users as well as authorization policies has been configured on the RADIUS server.
Authentication is a prerequisite for authorization. The authentication function must be enabled before the
authorization function. If the authentication function is disabled, the authorization function will
automatically be disabled. In terms of command configuration steps, the authorization command follows
the authentication command. If the authentication function is actually not enabled, the authorization
command is unavailable.
The authorization function for two-stage dialing users is enabled for a specific access number, while the
authorization function for one-stage dialing users is enabled in voice AAA client view.
Configuration procedure
To enable the authorization function for two-stage dialing users: