R2511-HP MSR Router Series Voice Configuration Guide(V5)

344
Enabling the language selection function
The language selection function applies to only the caller number process with IVR. With the language
selection function enabled, the voice gateway will play tones to prompt for a language first and then a
called number after a user dials an access number.
Configuration prerequisites
You have configured an access number and entered access number view.
Configuration procedure
To configure the language options:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Enter access number view.
gw-access-number access-number
N/A
5. Specify the two-stage dialing
process as caller number
process with IVR.
process-config voice-caller N/A
6. Configure the language
options.
selectlanguage { enable | chinese
| english }
Chinese by default. After a user
dials the access number, the voice
gateway plays tones in Chinese to
prompt for a called number.
Displaying and maintaining voice RADIUS
Task Command Remarks
Display voice RADIUS call history
records.
display voice call-history-record { all |
callednumber called-number | callingnumber
calling-number | cardnumber card-number |
remote-ip-addr ip-address | last last-number
| line line-number } [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display all voice RADIUS
configurations.
display voice access-number [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display statistics of messages
exchanged between voice RADIUS
module, external call control
module, and AAA module.
display voice radius statistic [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Clear the statistics of messages
exchanged between the voice
RADIUS module, call management
center (CMC) module, and AAA
module.
reset voice radius statistic
Available in user view.