R2511-HP MSR Router Series Voice Configuration Guide(V5)

Figure 6 Network diagram

Configuration procedure

Routing-related configurations are beyond the scope of this example. This example assumes that Router

A and Router B are reachable to each other.

1. Configure Router A:

# Configure the VoIP voice entity to Router B.

<RouterA> system-view

[RouterA] voice-setup

[RouterA-voice] dial-program

[RouterA-voice-dial] entity 0755 voip

[RouterA-voice-dial-entity755] match-template 0755....

[RouterA-voice-dial-entity755] address sip ip 2.2.2.2

[RouterA-voice-dial-entity755] quit

# Configure the POTS voice entity corresponding to the local interface Line 1/0.

[RouterA-voice-dial] entity 1001 pots

[RouterA-voice-dial-entity1001] match-template 0101001

[RouterA-voice-dial-entity1001] line 1/0

[RouterA-voice-dial-entity1001] quit

# Configure the POTS voice entity corresponding to the local interface Line 1/1.

[RouterA-voice-dial] entity 1002 pots

[RouterA-voice-dial-entity1002] match-template 0101002

[RouterA-voice-dial-entity1002] line 1/1

2. Configure Router B:

# Configure the VoIP voice entity to Router A.

<RouterB> system-view

[RouterB] voice-setup

[RouterB-voice] dial-program

[RouterB-voice-dial] entity 010 voip

[RouterB-voice-dial-entity10] match-template 010....

[RouterB-voice-dial-entity10] address sip ip 1.1.1.1

[RouterB-voice-dial-entity10] quit

# Configure the POTS voice entity corresponding to the local interface Line 2/0.

[RouterB-voice-dial] entity 2001 pots

[RouterB-voice-dial-entity1001] match-template 07552001

[RouterB-voice-dial-entity1001] line 2/0

[RouterB-voice-dial-entity1001] quit