R2511-HP MSR Router Series Voice Configuration Guide(V5)

[RouterB-voice-dial] entity 010 voip

[RouterB-voice-dial-entity10] match-template 010....

[RouterB-voice-dial-entity10] address ip 1.1.1.1

# Enable out-of-band DTMF transmission for the VoIP voice entity.

[RouterB-voice-dial-entity10] outband h225

[RouterB-voice-dial-entity10] quit

# Configure the local interface and phone number for Telephone B.

[RouterB-voice-dial] entity 2001 pots

[RouterB-voice-dial-entity2001] match-template 07552001

[RouterB-voice-dial-entity2001] line 1/1

# Enable out-of-band DTMF transmission for the POTS voice entity.

[RouterB-voice-dial-entity2001] outband h225

Troubleshooting voice entity configuration

Busy tone heard immediately after number dialed

Symptom

The busy tone is heard immediately after a number is dialed.

Solution

• Check whether the called party is busy.

• Check that the peer is reachable. You can use the ping command to ping the peer's IP address.

• Check that the voice entity configuration is correct.