R2511-HP MSR Router Series Voice Configuration Guide(V5)

34
Configuration task list
Task Remarks
Configuring call progress tones Required.
Configuring basic functions Optional.
Configuring FXS voice subscriber line Optional.
Configuring FXO voice subscriber line Optional.
Binding an FXS voice subscriber line to an FXO voice subscriber line Optional.
Configuring E&M voice subscriber line Optional.
Configuring DTMF Optional.
Configuring options related to dial plan Optional.
Configuring adjustment functions Optional.
Rebooting a voice card Optional.
Configuring global default parameters for voice subscriber lines Optional.
Configuring call progress tones
This section covers how to specify and configure the call progress tones of a country.
Configuration prerequisites
The router is equipped with an applicable FXS, FXO, E&M, BSV, VE1, or VT1 voice interface card.
Specifying the call progress tones of a country
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Specify the call progress tones
of a country.
cptone country-type locale
By default, the call progress tones
of China are specified.
4. Configure the level parameter
for the call progress tones.
cptone tone-type { all | busy-tone
| congestion-tone | dial-tone |
ringback-tone | special-dial-tone |
waiting-tone } amplitude value
Optional.
By default, 1000 for busy tone and
congestion tone, 400 for dial tone
and special dial tone, and 600 for
ringback tone and waiting tone.
NOTE:
The configuration of the cptone country-type command will take effect on all voice ports of all cards on the
device.