R2511-HP MSR Router Series Voice Configuration Guide(V5)

54
Ste
p
Command Remarks
1. Reset the voice card in user
view.
reboot slot slot-number Optional.
2. Enter system view.
system-view N/A
3. Enter voice view.
voice-setup N/A
4. Reboot a voice card.
vi-card reboot slot-number Optional.
Configuring global default parameters for voice
subscriber lines
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Configure the default
input/output gain for all
subscriber lines.
default subscriber-line { receive |
transmit } gain value
Optional.
The default is 0.
For how to use the global default parameters for voice subscriber lines, see "Configuring voice entities."
Mirroring PCM, RTP, or voice command data on an
analog voice subscriber line
The mirroring function copies the specified pulse code modulation (PCM), voice Real Time Protocol (RTP),
and voice command data on an analog voice subscriber line to the specified destination. With the
mirroring function, you can analyze and locate problems.
To mirror PCM, RTP, or voice command data on an analog voice subscriber line to a specified interface
or destination:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter analogy voice
subscriber line view.
subscriber-line line-number N/A
3. Mirror PCM, RTP packets, or
voice command data to a
specified interface or
destination.
mirror number number { pcm | { in
| out | all } { command | data } } to
{ local-interface interface-type
interface-number [ mac H-H-H ] |
remote-ip ip-address [ port port ] }
Optional.
By default, no traffic is mirrored.