R2511-HP MSR Router Series Voice Configuration Guide(V5)

[RouterB] voice-setup

[RouterB-voice] dial-program

# Configure a VoIP entity for IP calls and set the match template to 010….

[RouterB-voice-dial] entity 010 voip

[RouterB-voice-dial-entity10] match-template 010....

[RouterB-voice-dial-entity10] address sip ip 192.168.0.71

[RouterB-voice-dial-entity10] quit

# Configure a POTS entity on the FXS voice subscriber line.

[[RouterB-voice-dial] entity 2101002 pots

[RouterB-voice-dial-entity2101002] match-template 2101002

[RouterB-voice-dial-entity2101002] line 6/24

[RouterB-voice-dial-entity2101002] quit

# Configure a backup POTS entity on the FXO voice subscriber line, set the match template to .T,

enable the sending of all digits of a called number, and configure a calling number permitted to

originate calls to the POTS entity.

[RouterB-voice-dial] entity 011 pots

[RouterB-voice-dial-entity11] match-template .T

[RouterB-voice-dial-entity11] line 6/0

[RouterB-voice-dial-entity11] send-number all

[RouterB-voice-dial-entity11] caller-permit 2101002

[RouterB-voice-dial-entity11] quit

[RouterB-voice-dial] quit

[RouterB-voice] quit

# Configure the PLAR function and the delay off-hook binding.

[RouterB] subscriber-line 6/0

[RouterB-line6/0] private-line 2101002

[RouterB-line6/0] hookoff-mode delay bind 6/24

[RouterB-line6/0] quit

# Configure a dial plan where the VoIP entity is preferred.

[RouterB] voice-setup

[RouterB-voice] dial-program

[RouterB-voice-dial] select-rule type-first 2 1 3 4

3. In the case that the IP network is unavailable, configure Router A and Router B as follows:

# Configure Router A, with the POTS entity preferred and the other configurations remaining

unchanged.

<RouterA> system-view

[RouterA] voice-setup

[RouterA-voice] dial-program

[RouterA-voice-dial] select-rule type-first 1 2 3 4

# Configure Router B, with the POTS preferred and the other configurations remaining unchanged.

<RouterB> system-view

[RouterB] voice-setup

[RouterB-voice] dial-program

[RouterB-voice-dial] select-rule type-first 1 2 3 4