R2511-HP MSR Router Series Voice Configuration Guide(V5)

70
Step Command Remarks
8. Enable the nonlinear function
of echo cancellation.
nlp-on
Optional.
Enabled by default.
This command takes effect only
after the echo-canceller enable
command is issued.
Configuring the comfortable noise function
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter E1/T1 interface view.
controller { e1 | t1 } slot-number N/A
3. Create a TS set according to
the selected signaling mode.
timeslot-set ts-set-number timeslot-list
timeslots-list signal { e&m-delay |
e&m-immediate | e&m-wink | fxo-ground |
fxo-loop | fxs-ground | fxs-loop | r2 }
N/A
4. Exit E1/T1 interface view.
quit N/A
5. Enter voice subscriber line
view.
subscriber-line slot-number:ts-set-number N/A
6. Enable the comfortable noise
function.
cng-on
Optional.
Enabled by default.
Configuring options related to dial plan
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter E1/T1 interface view.
controller { e1 | t1 } slot-number N/A
3. Create a TS set according to
the selected signaling mode.
timeslot-set ts-set-number
timeslot-list timeslots-list signal
{ e&m-delay | e&m-immediate |
e&m-wink | fxo-ground |
fxo-loop | fxs-ground | fxs-loop |
r2 }
N/A
4. Exit E1/T1 interface view.
quit N/A
5. Enter voice subscriber line
view.
subscriber-line
slot-number:ts-set-number
N/A
6. Enable the private line auto
ring function.
private-line string
Optional.
Disabled by default.
7. Bind a calling/called number
substitution rule list to a voice
subscriber line.
substitute { called | calling }
list-number
By default, no calling/called
number substitution rule list is
bound to a voice subscriber line.
For more information about the above commands, see Voice Command Reference.