R2511-HP MSR Router Series Web-Based Configuration Guide(V5)

318

Item Descri

tion

Registration

Function

• Enable.

• Disable.

By default, the registration function of the SIP trunk account is disabled.

To perform registration, you must provide the host username or associate the account with

a SIP server group.

Authentication

Username

Enter the authentication username for the SIP trunk account.

Authentication

Password

Enter the authentication password for the SIP trunk account.

Configuring registration parameters for a SIP trunk account

Select Voice Management > Call Connection > SIP Connection from the navigation tree and click the

Advanced Settings tab to configure registration parameters for a SIP trunk account. For more information

about registration parameter configuration, see "Configuring SIP connection."

Configuring a call route for outbound calls

This section describes how to configure a call route for outbound calls.

Configuring a call route for a SIP trunk account

To use a SIP trunk account to call an external user, you must first bind the SIP trunk account to a call route,

and then configure call routes in one of the following methods:

• Bind a SIP server group to the VoIP voice entity.

• Specify the IP routing.

• Specify the proxy server used for outbound calls.

To configure a call route for a SIP trunk account:

Select Voice Management > SIP Trunk Management > Call Route from the navigation tree, and click

Add.