R2511-HP MSR Router Series WLAN Command Reference(V5)

98
Default
The WMM function is enabled.
Views
WLAN-Radio interface view
Default command level
2: System level
Usage guidelines
The 802.11n protocol stipulates that all 802.11n clients support WLAN QoS. Therefore, when the radio
operates in 802.11an or 802.11gn mode, you should enable WMM. Otherwise, the associated 802.11n
clients might fail to communicate.
Examples
# Disable the WMM function.
<Sysname> system-view
[Sysname] interface WLAN-Radio2/0
[Sysname-WLAN-Radio2/0] undo wmm enable
wmm svp map-ac
Use wmm svp map-ac to map SVP packets to a specific AC queue.
Use undo wmm svp map-ac to restore the default.
Syntax
wmm svp map-ac { ac-vo | ac-vi | ac-be | ac-bk }
undo wmm svp map-ac
Default
SVP packet mapping is disabled.
Views
WLAN-Radio interface view
Default command level
2: System level
Parameters
ac-vo: Specifies the AC-VO (voice traffic) queue.
ac-vi: Specifies the AC-VI (video traffic) queue.
ac-be: Specifies the AC-BE (best-effort traffic) queue.
ac-bk: Specifies the AC-BK (background traffic) queue.
Usage guidelines
HP recommends that you map SVP packets to the AC-VO queue in normal cases.
Examples
# Map SVP packets to the AC-VO queue.
<Sysname> system-view