R2511-HP MSR Router Series WLAN Command Reference(V5)

: 13565 unicasts, 520774 bytes

: 16442 multicasts/broadcasts, 1015840 bytes

: 0 fragmented

: 5687 discarded, 263913 bytes

: 0 duplicates, 3054 FCS errors

: 2 decryption errors

Output: 2032 packets, 468562 bytes

: 7 unicasts, 1776 bytes

: 312 multicasts/broadcasts, 40114 bytes

: 1713 others, 426672 bytes

: 0 fragmented

: 0 discarded, 0 bytes

: 0 failed RTS, 335 failed ACK

: 334 transmit retries, 122 multiple transmit retries

Table 3 Command output

Field Descri

tion

WLAN-Radio2/0 current state Physical link state of the WLAN radio interface.

IP Packet Frame Type Output frame encapsulation type.

Hardware Address MAC address of the interface.

Description Description of the interface.

Radio-type dot11g WLAN protocol type used by the interface.

channel auto(11)

Channel used by the interface. The keyword auto means the

channel is automatically selected and 11 is the number of the

selected channel.

If the channel is manually selected, the field will be displayed in

the format of channel configured-channel.

power(dBm) 23

Transmit power of the interface (in dBm). The value 23 is the

transmit power configured by the user. For more information

about the max-power command, see WLAN Command

Reference.

Secondary channel offset

Secondary channel information for 802.11n radio mode:

• SCA (Second Channel Above)—The AP operates in 40 MHz

bandwidth mode, and the secondary channel has a higher

bandwidth than the primary channel.

• SCB (Second Channel Below)—The AP operates in 40 MHz

bandwidth mode, and the secondary channel has a lower

bandwidth than the primary channel.

• SCN—The AP operates in 20 MHz bandwidth mode.