R2511-HP MSR Router Series WLAN Command Reference(V5)

12
WLAN access configuration commands
The terms AP and fat AP in this document refer to MSR900, MSR93X and MSR20-1X routers with IEEE
802.11b/g and MSR series routers installed with a SIC WLAN module.
802.11 MAC configuration commands
a-mpdu enable
Use a-mpdu enable to enable the Aggregated MAC Protocol Data Unit (A-MPDU) function for the radio.
Use undo a-mpdu enable to disable the A-MPDU function for the radio.
Syntax
a-mpdu enable
undo a-mpdu enable
Default
The A-MPDU function is enabled.
Views
WLAN-radio interface view
Default command level
2: System level
Usage guidelines
This command is only effective on 802.11n radios.
If you change the radio type of an 802.11n radio, the default setting for this function of the new radio type
is restored.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
a-mpdu
enable
No
Available
for
MSR93X
(WLAN &
HSPA+),
MSR93X
(WLAN &
EVDO) and
MSR93X
(WLAN).
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n.
Examples
# Disable the A-MPDU function of the current WLAN radio interface.