R2511-HP MSR Router Series WLAN Command Reference(V5)

13
<sysname> system-view
[sysname] interface WLAN-Radio 2/0
[sysname-WLAN-Radio2/0] undo a-mpdu enable
a-msdu enable
Use a-msdu enable to enable the A-MSDU function for the radio.
Use undo a-msdu enable to disable the A-MSDU function for the radio.
Syntax
a-msdu enable
undo a-msdu enable
Default
The A-MSDU function is enabled.
Views
WLAN-radio interface view
Default command level
2: System level
Usage guidelines
This command is only effective on 802.11n radios. If you change the radio type of an 802.11n radio, the
default setting for this function of the new radio type is restored.
The device only receives but does not send A-MSDU frames.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
a-msdu
enable
No
Available
for
MSR93X
(WLAN &
HSPA+),
MSR93X
(WLAN &
EVDO) and
MSR93X
(WLAN).
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Examples
# Disable the A-MSDU function of the current WLAN radio interface.
<sysname> system-view
[sysname] interface WLAN-Radio 2/0
[sysname-WLAN-Radio2/0] undo a-msdu enable
antenna type
Use antenna type to specify the antenna type.