R2511-HP MSR Router Series WLAN Command Reference(V5)

15
[Sysname] wlan service-template 1 clear
[Sysname-wlan-st-1] beacon ssid-hide
beacon-interval
Use beacon-interval to set the interval for sending beacon frames. Beacon frames are transmitted at a
regular interval to allow mobile clients to join the network.
Use undo beacon-interval to restore the default beacon interval.
Syntax
beacon-interval interval
undo beacon-interval
Default
The beacon interval is 100 TUs.
Views
WLAN radio interface view
Default command level
2: System level
Parameters
interval: Specifies the interval for sending beacon frames. The value is in the range of 32 to 8191 time
units (TUs).
Examples
# Specify the beacon interval as 1000 TUs.
<Sysname> System-view
[Sysname] interface wlan-radio 2/0
[Sysname-WLAN-Radio2/0] beacon-interval 1000
channel
Use channel to specify a channel for the radio.
Use undo channel to restore the default.
Syntax
channel { channel-number | auto }
undo channel
Default
Auto mode is set.
Views
WLAN radio interface view
Default command level
2: System level