R2511-HP MSR Router Series WLAN Command Reference(V5)

17
Paramete
r
MSR90
0
MSR93X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
20 No
Available
for
MSR93X
(WLAN &
HSPA+),
MSR93X
(WLAN &
EVDO) and
MSR93X
(WLAN).
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
40 No
Available
for
MSR93X
(WLAN &
HSPA+),
MSR93X
(WLAN &
EVDO) and
MSR93X
(WLAN).
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Examples
# Configure the channel bandwidth of the radio as 20 MHz.
<sysname> system-view
[sysname] interface Wlan-radio 2/0
[sysname-WLAN-Radio2/0] radio-type dot11gn
[sysname-WLAN-Radio2/0] channel band-width 20
client dot11n-only
Use client dot11n-only to only allow 802.11n client access.
Use undo client dot11n-only to restore the default.
Syntax
client dot11n-only
undo client dot11n-only
Default
An 802.11gn radio permits both 802.11b/g and 802.11gn client access.
Views
WLAN radio interface view
Default command level
2: System level
Usage guidelines
The client dot11n-only command prohibits non-802.11n clients from access. To provide access for all
802.11b/g clients, disable this command.