R2511-HP MSR Router Series WLAN Command Reference(V5)

18
The following matrix shows the command and router compatibility:
Command
MSR90
0
MSR93X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
client
dot11n-only
No
Available
for
MSR93X
(WLAN &
HSPA+),
MSR93X
(WLAN &
EVDO)
and
MSR93X
(WLAN).
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Examples
# Configure the radio to allow only 802.11n clients to access.
<sysname> system-view
[sysname] interface Wlan-radio 2/0
[sysname-WLAN-Radio2/0] radio-type dot11gn
[sysname-WLAN-Radio2/0] client dot11n-only
client max-count (service template view)
Use client max-count to specify the maximum number of allowed clients for the radio policy.
Use undo client max-count to restore the default.
Syntax
client max-count max-number
undo client max-count
Default
Up to 32 clients can be associated with an SSID on a radio.
Views
Service template view
Default command level
2: System level
Parameters
max-number: Maximum number of clients associated with an SSID, in the range of 1 to 64.
Usage guidelines
When the maximum number is reached, the SSID is automatically hidden.
Examples
# Specify the maximum number of clients associated with the SSID service on a radio as 10.
<Sysname> system-view
[Sysname] wlan service-template 1 clear