R2511-HP MSR Router Series WLAN Command Reference(V5)

20
Table 4 Command output
Field Descri
p
tion
SSID SSID with which the client is associated.
MAC address MAC address of the client.
User Name
Username of the client:
• The field is displayed as -NA- if the client adopts plain-text authentication or
cipher-text authentication with no username.
• The field is irrelevant to the portal authentication method. If the client uses the portal
authentication method, the field does not display the portal username of the client.
APID/RID ID of the AP or radio that the client is associated with.
IP Address IP address of the client.
VLAN VLAN to which the client belongs.
# Display detailed information about all clients.
<Sysname> display wlan client verbose
Total Number of Clients : 1
Client Information
--------------------------------------------------------------------------
MAC Address : 0014-6c91-9a14
User Name : Guest
AID : 251
Radio Interface : WLAN-Radio2/0
SSID : nsw-nsw
BSSID : 000f-e2cc-2022
Port : WLAN-BSS1
VLAN : 1
State : Running
Power Save Mode : Sleep
Wireless Mode : 11gn
Channel Band-width : 20MHz
SM Power Save Enable : Disabled
Short GI for 20MHz : Not Supported
Short GI for 40MHz : Not Supported
Support MCS Set : 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
BLOCK ACK-TID 0 : BOTH
QoS Mode : WMM
Listen Interval (Beacon Interval) : 10
RSSI : 25
Rx/Tx Rate : 48/54
Client Type : RSN
Authentication Method : Open System
AKM Method : Dot1X
4-Way Handshake State : PTKINITDONE
Group Key State : IDLE
Encryption Cipher : CCMP
Roam Status : Normal