R2511-HP MSR Router Series WLAN Command Reference(V5)

21
Roam Count : 0
Up Time (hh:mm:ss) : 00:05:15
-------------------------------------------------------------------------------
Table 5 Command output
Field Descri
p
tion
MAC address MAC address of the client.
User Name
Username of the client:
• The field is displayed as -NA- if the client adopts plain-text authentication or
cipher-text authentication with no username.
• The field is irrelevant to the portal authentication method. If the client uses the
portal authentication method, the field does not display the portal username of the
client.
AID Association ID of the client.
Radio Interface WLAN radio interface.
SSID SSID of the client.
BSSID ID of the BSS.
Port WLAN-DBSS interface associated with the client.
VLAN VLAN to which the client belongs.
State State of the client such as running.
Power Save Mode Client’s power save mode such as active or sleep.
Wireless Mode
Wireless mode such as 802.11b, 802.11g, 802.11gn.
IMPORTANT:
Support for the wireless mode depends on the device model.
Channel Band-width Channel bandwidth, 20 MHz or 40 MHz.
SM Power Save Enable
SM Power Save enables a client to have one antenna in the active state, and others
in sleep state to save power.
• Enabled—SM Power Save is enabled.
• Disabled—SM Power Save is disabled.
Short GI for 20MHz Whether the client supports short GI when its channel bandwidth is 20 MHz.
Short GI for 40MHz Whether the client supports short GI when its channel bandwidth is 40 MHz.
Support MCS Set MCS supported by the client.
BLOCK ACK-TID 0
BLOCK ACK is negotiated based on traffic identifier (TID) 0:
• OUT—Outbound direction.
• IN—Inbound direction.
• BOTH—Both outbound and inbound directions.
QoS Mode
WMM indicates that the WMM function is supported; None indicates that the WMM
function is not supported.
WMM information negotiation is carried out between an AP and a client that both
support WMM.
Listen Interval(Beacon
Interval)
Number of times the client has woken up to listen to beacon frames.