R2511-HP MSR Router Series WLAN Command Reference(V5)

28
Field Descri
p
tion
Failures Total number of failed associations.
Reassociations Total number of reassociations.
Rejections Total number of associations rejected.
Exceptional Deassociations Total number of exceptional associations.
Current Associations Number of current associations.
distance
Use distance to configure the maximum distance that the radio can cover.
Use undo distance to restore the default.
Syntax
distance distance
undo distance
Default
The radio can cover 1 km (0.62 miles) at most.
Views
WLAN radio interface view
Default command level
2: System level
Parameters
distance: Specifies the maximum distance that the radio can cover, in the range of 1 to 40 km (0.62 to
24.86 miles).
Examples
# Configure the maximum distance that the radio can cover as 5 km (3.11 miles).
<Sysname> system-view
[Sysname] interface wlan-radio 2/0
[Sysname-WLAN-Radio2/0] distance 5
dtim
Use dtim to set the number of beacon intervals an AP waits before it sends buffered multicast and
broadcast frames. The AP sends buffered broadcast/multicast frames when the DTIM counter reaches the
configured value.
Use undo dtim to restore the default.
Syntax
dtim counter
undo dtim