R2511-HP MSR Router Series WLAN Command Reference(V5)

29
Default
The DTIM is 1.
Views
WLAN radio interface view
Default command level
2: System level
Parameters
counter: Number of beacon intervals between DTIM transmissions. The value is in the range of 1 to 31.
Examples
# Set the DTIM counter to 10.
<Sysname> system-view
[Sysname] interface WLAN-Radio 2/0
[Sysname-WLAN-Radio2/0] dtim 10
fast-association enable
Use fast-association enable to enable fast association.
Use undo fast-association enable to disable fast association.
Syntax
fast-association enable
undo fast-association enable
Default
Fast association is disabled.
Views
Service template view
Default command level
2: System level
Usage guidelines
When fast association is enabled, the AP does not perform band navigation and load balancing
calculations for clients bound to the SSID.
Examples
# Enable fast association.
<Sysname> system-view
[Sysname] wlan service-template 1
[Sysname-wlan-st-1] fast-association enable
fragment-threshold
Use fragment-threshold to specify the maximum length of frames that can be transmitted without
fragmentation. A packet that exceeds the specified fragment threshold is fragmented.
Use undo fragment-threshold to restore the default value.