R2511-HP MSR Router Series WLAN Command Reference(V5)

31
max-power
Use max-power to configure the maximum transmission power on the radio.
Use undo max-power to restore the default.
Syntax
max-power radio-power
undo max-power
Default
The maximum radio power varies with country codes, channels, AP models, radio types, and antenna
types. If 802.11n is adopted, the maximum radio power also depends on the bandwidth mode.
Views
WLAN radio interface view
Default command level
2: System level
Parameters
radio-power: Maximum radio transmission power, which varies with country codes and radio types.
Examples
# Specify the max transmission power of radio 2/0 as 5.
<Sysname> system-view
[Sysname] interface WLAN-Radio 2/0
[Sysname-WLAN-Radio2/0] radio-type dot11b
[Sysname-WLAN-Radio2/0] max-power 5
max-rx-duration
Use max-rx-duration to specify the interval for the AP to hold a received frame. An AP holds received
packets in its buffer memory.
Use undo max-rx-duration to restore the default.
Syntax
max-rx-duration interval
undo max-rx-duration
Default
The max-rx-duration is 2000 milliseconds.
Views
WLAN radio interface view
Default command level
2: System level
Parameters
interval: Interval for which a frame received by an AP can stay in the buffer memory. The value is in the
range of 500 to 250000 milliseconds.