R2511-HP MSR Router Series WLAN Command Reference(V5)

34
Parameter MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
dot11b Yes Yes Yes Yes Yes Yes Yes
dot11g Yes Yes Yes Yes Yes Yes Yes
dot11gn No
Available
for
MSR93X
(WLAN &
HSPA+),
MSR93X
(WLAN &
EVDO)
and
MSR93X
(WLAN).
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Examples
# Specify the radio type as 802.11g for interface WLAN-Radio 2/0.
<Sysname> system-view
[Sysname] interface WLAN-Radio 2/0
[Sysname-WLAN-Radio2/0] radio-type dot11g
reset wlan client
Use reset wlan client to cut off a client or all clients. When this command is used, the AP sends a
de-authentication frame to the client and the client is removed from the WLAN service.
Syntax
reset wlan client { all | mac-address mac-address }
Views
User view
Default command level
2: System level
Parameters
all: Cuts off all clients.
mac address mac-address: Cuts off the client specified by the MAC address.
Examples
# Cut off the client with MAC address 000f-e2cc-8501.
<Sysname> reset wlan client mac-address 000f-e2cc-8501
reset wlan statistics
Use reset wlan statistics to clear client or radio statistics.
Syntax
reset wlan statistics client { all | mac-address mac-address }