R2511-HP MSR Router Series WLAN Command Reference(V5)

35
Views
User view
Default command level
2: System level
Parameters
all: Clears the statistics of all clients.
mac-address mac-address: Clears the statistics of the client.
Examples
# Clear the statistics of all clients.
<Sysname> reset wlan statistics client all
rts-threshold
Use rts-threshold to specify the request to send (RTS) threshold length. If a frame is larger than this value,
the RTS mechanism is used.
Use undo rts-threshold to restore the default.
Syntax
rts-threshold size
undo rts-threshold
Default
The RTS threshold is 2346 bytes.
Views
WLAN radio interface view
Default command level
2: System level
Parameters
size: Length of frames for which the request to send (RTS) method is used. The value is in the range of 0
to 2346 bytes.
Usage guidelines
Request to Send (RTS) is used to avoid data sending collisions in a WLAN. You need to set a rational
value:
A small value causes RTS packets to be sent more often, consuming more of the available bandwidth.
However, the system can recover more quickly from interference or collisions when RTS packets are sent
more frequently.
Examples
# Specify the RTS threshold as 2046 bytes.
<Sysname> system-view
[Sysname] interface WLAN-Radio 2/0
[Sysname-WLAN-Radio2/0] rts-threshold 2046