R2511-HP MSR Router Series WLAN Command Reference(V5)

36
service-template (WLAN radio interface view)
NOTE:
Support for this command depends on the device model (only supported on fat APs).
Use service-template to map a service template to the current radio.
Syntax
service-template service-template-number interface wlan-bss wlan-bss-number
undo service-template service-template-number
Default
No service-template is mapped to a WLAN-BSS interface on a WLAN radio interface.
Views
WLAN radio interface view
Default command level
2: System level
Parameters
service-template-number: Number of a service template, in the range of 1 to 1024.
wlan-bss-number: Number of a WLAN-BSS interface in, the range of 0 to 1023.
Examples
# Map service template 1 to interface WLAN-BSS 1 on interface WLAN-Radio 2/0.
<Sysname> system-view
[Sysname] interface WLAN-Radio 2/0
[Sysname-WLAN-Radio2/0] service-template 1 interface WLAN-BSS 1
service-template (service template view)
Use service-template to map a service template to a WLAN-BSS interface on the current WLAN radio
interface.
Use undo service-template to remove the mapping.
Syntax
service-template { disable | enable }
Default
The service template is disabled.
Views
Service template view
Default command level
2: System level
Parameters
disable: Disables the service template.
enable: Enables the service template.